configure lldp ports dcbx delete application

Description

Removes the priority configuration for one or all applications from the specified ports.

Syntax Description


all	Specifies all ports on the switch.
`port_list`	Specifies one or more ports or slots and ports.
`application_name`	Specifies an application. Supported values are: fcoe—Fiber Channel Over Ethernet (FCoE). fip—FCoE Initiation Protocol (FIP). iscsi—Internet Small Computer System Interface (iSCSI).
`ethertype_value`	Specifies an ethertype value in the range of 1536 to 65535.
L4-port `port_number`	Specifies a Layer 4 port number in the range of 0 to 65535. Supported Layer4 protocols include TCP, SCTP, UDP, and DCCP.
tcp-port `port_number`	Specifies a TCP port number in the range of 0 to 65535.
udp-port `port_number`	Specifies a UDP port number in the range of 0 to 65535.

Default

N/A.

Usage Guidelines

This command configures the switch to advertise the priority that an end station should use for the specified application or port number. The priority number is mapped to an 802.1p value, which determines how the switch manages traffic from that application or port.

If an application configuration already exists on the specified port or ports, the priority is updated to the new value.

Example

The following command removes the priority configuration for Layer 4 port 30 on port 23:

configure lldp ports 23 dcbx delete application L4-port 30

History

This command was first available in ExtremeXOS 12.6.

Platform Availability

This command is available on all Universal switches supported in this document.